The main reason for the under-injection is that the flow resistance is too large, which prevents the melt from continuing to flow. Factors affecting the melt flow length include: part wall thickness, mold temperature, injection pressure, melt temperature and material composition. These factors can cause short bets if not handled properly. Therefore, how to eliminate the under-injection defects of metal powder injection molding is very important. The following is a brief introduction by Shenzhen Best Editor to eliminate the under-injection defects of metal powder injection molding: 1. Improper control of process conditions: it should be adjusted appropriately. 2. The injection capacity of the metal powder injection molding machine is less than the weight of the plastic parts: a larger size metal powder injection molding machine should be used. 3. The cross section of runner and gate is too small: it should be enlarged appropriately. 4. The flow distance of the melt in the mold cavity is too long or there is a thin-walled part: cold cavity should be set. 5. Poor exhaust of the mold, the residual air in the mold cavity leads to under-injection: the exhaust system of the mold should be improved. 6. The flowability of raw materials is too poor: resin with better flowability should be used. 7. The temperature of the barrel is too low, the injection pressure of the metal powder is insufficient or the injection time of the replenishment is too short. The above is the troubleshooting method for under-injection defects of metal powder injection molding organized by Shenzhen Best Editor. If you want to know more about the metal powder injection molding technology, please consult the Shenzhen Best Metal Powder Injection Molding MIM technical professional team Answer for you! Shenzhen Best Precision Technology Co., Ltd. is a diversified technology company integrating metal injection molding, metal and ceramic 3D printing, and metal jewelry development and production. Best Precision has reached a strategic cooperation with well-known domestic and foreign feeding companies (Kadem Feeding) and BSF for MIM product development and production, mainly for metal powder injection molding, metal powder injection molding, powder injection molding, powder injection molding, Metal 3D printing wire, metal powder injection molding factory, metal powder injection molding factory, powder injection molding factory, powder injection molding factory, MIM process, MIM processing, MIM factory to provide customers in various industries around the world with large quantities, high quality and reasonable MIM products at a price. The company has assembled a team of senior experts in technology, management and market development in the industry, adhering to many years of MIM technology experience and industrial production operation experience, with internationally mature MIM technology, efficient supply chain management and rapid and effective large Large-scale manufacturing capabilities provide customers with a one-stop solution from the preliminary design, sample development and mass production of MIM products.